A pressure tank with a working air charge helps the pump cycle less often and keeps pressure steady at the taps. Many homeowners with a well can check this part themselves, as long as they stay clear of the pump and the wiring. The job is to read the air side, compare it with the tank's own label, and decide whether the next step is yours or a professional's.
What you can check yourself
Start by switching off the pump at the breaker, not only at a switch you might not trust. Open a cold tap near the tank and let it run until water stops, which drains the tank. Locate the air valve on the top of the tank, which looks like a tire valve. Use a standard tire gauge to read the air pressure. Find the precharge figure on the tank label or in the manufacturer's paperwork, since the correct number depends on the tank and the pump settings. Write down the reading and the target before you do anything else.
What to do with the reading
If the reading is close to the target and the tank is holding its charge, leave it alone and note the date you checked. If the reading is well below target, the tank may need air added, and some homeowners do this with a tire pump. Stop if water comes out of the air valve, if the valve is wet or the tank is leaking, or if the reading drops back to zero quickly after you add air. Those are signs of a failed bladder or a leak, and a tech should look at the tank.
Where your hands end
Do not open the pump housing, touch pump wiring, or change the pressure switch settings. Those jobs involve electricity and pressure, and they should be done by a licensed electrician or a well pump technician. Do not try to replace the tank yourself. If you find you need to add air often, that usually points to a leak or a failing bladder, and the question for the tech is where the air is going, not only how to put more in.
What to ask the tech to do
When you call someone in, ask them to record the precharge, the pump's cut-in and cut-out pressures, and the tank's condition in writing. Ask whether they will test the system under flow, and whether they will explain any change in the readings from one visit to the next. A clear written record gives you something to compare the next time you check the tank yourself.