Many water treatment quotes list the unit, the media or cartridges, the plumbing connections and the drain, then say little about electricity. Some equipment needs power and some does not, and the power line can add cost that has nothing to do with the treatment itself. Before you compare two quotes, find out whether power is needed at all, and if so, whether the quote already covers getting it to the unit.
Start with a simple question: does the equipment need power?
A traditional softener or sediment filter that runs on water flow may need no outlet at all, although some control heads and metering valves do need a standard outlet. Equipment such as ultraviolet disinfection units, booster pumps, some well pump controllers and certain monitoring devices needs a continuous supply. Ask each provider to write down which parts of the system need power, the voltage listed on the unit, and where the plug or hardwired connection will be. A quote that says nothing about power is not necessarily wrong, but you need to know whether the price includes it.
Check the distance and the spot
Walk the planned location with the quote in hand. Measure from the proposed unit position to the nearest outlet that is already in use and suitable for the job. If the nearest outlet is across the room, behind a wall, or on a different part of the house, the quote should say whether the work includes a new outlet, an extension of an existing circuit, or a relocation of the unit. Each of those is a different amount of work and a different amount of money. Note whether the spot is damp, such as a basement, crawl space, utility room or outdoor enclosure, because wet or outdoor locations can affect what type of outlet and cover is required.
Ask who runs the wiring and who confirms it
Some providers include electrical work with their own crew, some subcontract it, and some leave it entirely to you. Ask directly. If the provider lists electrical work as a separate item or an exclusion, get a named source for it, such as a licensed electrician you have chosen or a quote from that electrician. Ask what the local requirements are for the outlet, its protection and its circuit, and ask the electrician to confirm those requirements against your home. You are asking for the local rules to be confirmed, not asking the water provider to decide them.
Look for the hidden add-ons
Electrical costs often appear in the change order list rather than the original quote. Watch for these items: a new dedicated outlet, a longer run of cable through finished walls, a protected outlet near water, a switch or cover that must be installed, and a separate visit to the electrician after the water work is done. Also check whether the quote assumes an outlet that the installer later finds is not there or does not work. Ask the provider what happens if that assumption fails before work starts.
What to compare before you sign
Put the power line next to the other lines on each quote. For each provider, note whether power is required, whether the outlet is included, who does the work, whether the electrician is named, and what happens if the outlet is missing on install day. A lower equipment price can become a higher total once the power work is added, so compare the full cost to get the unit running, not just the unit itself.