A water report is the document every equipment choice rests on, so it deserves the same scrutiny as the quote. Many reports look official but leave out the details that decide which equipment fits. This guide lists what to confirm on the paper before you compare any provider's recommendation.
Start with where the sample came from
Ask which tap or point the sample was drawn from. A sample taken at an outdoor hose bib, a kitchen faucet, or a point before any existing treatment tells you different things. If your home already has a softener or filter, a sample taken after it does not show what the raw supply carries. Ask whether the sample was taken before or after any equipment, and write the answer on the report.
Confirm who ran the lab
Look for the name and address of the laboratory and whether it is certified for drinking water testing in your state. Most state environmental or health agencies publish a list of certified labs that you can search. A report from a lab not on that list may still be accurate, but you cannot rely on it for a decision this size without asking more questions.
Check that the right contaminants were tested
A test for hardness and iron says nothing about bacteria or nitrates, and a test for chlorine says nothing about metals. Make a short list of what you care about: taste, staining, scale, a known local issue, or a health concern raised by your doctor or local health office. Then check that each item appears on the report with a result, not just a blank line. If an item you care about is missing, ask for it to be tested before equipment is chosen.
Read the reporting limits
Some results appear as a number, and others appear as less than a stated detection limit. A result below the limit means the lab did not find the substance at that level, not that the substance is zero. Ask the provider to explain every result marked as below the limit in plain words, and ask whether any limit is high enough to hide a level that matters for your equipment choice.
For a city supply, get the utility report too
If you are on a municipal supply, ask the water utility for its most recent annual water quality report. Compare its results against your own sample. The utility report covers the supply at the plant or main, and your home's own plumbing can change what reaches the tap. Note the differences and ask the provider which one their recommendation is based on.
Ask one question before you commit
Ask the provider whether they interpreted the report or whether someone else did, and whether the person who interpreted it sells equipment. You are not asking them to be dishonest, only to be clear about where the advice comes from. Then ask them to put in writing which results drove the equipment recommendation. If they cannot point to specific lines on the report, the recommendation is not yet connected to your water.