A used water softener can save money, but the unit you see is only part of what you are buying. The history, the control valve and the parts available for it decide whether it will keep working after you take it home. Get those answers before you hand over money.
What to ask the seller
Ask how old the unit is and whether the resin has ever been replaced. Ask who serviced it and whether there is any written service record. Ask for the control valve model, then check whether replacement parts for that model can still be found.
Ask what kind of water the unit treated. A softener used on well water with iron, sediment or high flow may have a different wear pattern than one used on city water. Ask whether the bypass valve and fittings are included and whether they are in usable condition.
Ask who removes the unit and whether that cost is included. Ask what coverage, if any, exists and whether it is in writing. A verbal promise is hard to act on later.
What to check in person
Look at the tank for dents, cracks and rust at the base. Check the valve body for cracks, weeping at joints or corrosion. Look at the threads on the fittings and the condition of the brine tank, including the float and any visible residue. If the seller can run a cycle while you watch, ask them to do it and listen for the drain sound and any leaks during regeneration.
What to confirm before you pay
Do not rely only on the seller's word about the water. Test your own water, or ask for the test you need, so you know the hardness and any other conditions the softener must handle. A softener is designed for hardness. If your main problem is iron or sediment, a softener alone may not solve it, so confirm the match before you commit.
Measure the space and check that the unit can connect to your supply and drain where it will sit. Confirm the unit's rated capacity fits your household's daily use, not just the seller's description. For a sensible way to compare providers and equipment on the same terms, see our method for rating water treatment providers.
When to walk away
Walk away if the seller cannot explain the unit's history, if the valve model has no findable parts, if you see cracks or active leaks, if you are not allowed to test or inspect, or if you are pressed to pay before any inspection. A low price does not cover a unit that cannot be repaired.