When a provider tells you what your water needs, you are being asked to trust a conclusion. The useful question is whether the underlying test results support it. A one-page summary with a recommendation at the bottom is not enough. Ask for the full laboratory report, and read it before you agree to equipment, a service plan or a deposit.

What the full report should show

Look for the name and accreditation of the lab, the date the sample was collected, and who collected it. Check the list of parameters measured, because a result cannot address a contaminant that was never tested. For each result, look for the reported value, the units, and the detection limit. A value listed as below the detection limit means something different from a value of zero, and the difference matters when you compare results over time.

Questions to ask the provider

Ask where the sample was taken. Water drawn after an existing filter tells you about that filter, not about the source. Ask what sample container and handling were used, and whether the lab received the sample within the window it specifies. Ask which findings drive the recommendation and how each proposed piece of equipment addresses each finding. If a finding is not addressed, ask why it is left out.

Ask what the provider would recommend if a result came back within the normal range. A provider who can explain when they would not sell equipment is easier to trust than one who recommends the same thing for every result.

Warning signs

Be cautious if you are shown only a summary, if the test was a quick kit reading with no lab behind it, or if you are pressed to sign the same day. A deadline is not a reason to skip the report. If you cannot get the report, you have learned something about how the recommendation was made.

Our methodology page explains the questions we use when rating providers, including how we look at the testing and recommendation process. Use it as a checklist alongside the report.

If the water is for drinking

If the supply is used for drinking or cooking, ask your local health department or a certified lab which contaminants are relevant in your area and for your type of supply. That conversation should happen before you buy equipment, so the test you order matches the decision you are making.